Heavy Duty Industrial 3/3 Phase UPS
1. System Introduction
FC Series is a full digitized DSP controlled online double conversion 3 Phase Industrial UPS. LF transformer isolated all interferences such as Mains Input Surge or Load impact from the UPS, which also greatly reduce the risk of the UPS and load. FC Series has power parallel redundancy feature with real 0.9 output PF. It also contains friendly and intuitive user Interface. It provides reliable, stable, and constant AC power for computer equipment, telecommunication devices, precision equipment and network termination equipment (NTE).
2. System Features
2.1 High Performance Index
◆ Advanced SCR Rectifier Technology.With additional accessories, the input PF can be upto 0.99 and Input THDI <4.5%
◆ 5th generation IGBT technology to adapt 380/400/415V, 50/60Hz Mains Grid Supply Systems;
◆ Output Power Factor 0.9 to carry 12.5% load capacities than traditional UPS;
◆ Wide Input Voltage Range 380Vac (-45% to +25%) with 50/60Hz ±5% Frequency Range;
◆ High adaptive capacity and Generator Capability;
◆ Overall Efficiency upto 90%. Can reach to 98% on ECO Mode;
◆ Powerful overload ability with output short circuit protection technology: 110%-120% overloads for 10 minutes.125%-150% for 1 minute;
◆ Flexible Battery Configuration. It can be set on the front panel with 28-32 Units of Batteries. Common Battery Bank on Parallel mode. Battery Charging Compensation Feature.
◆ Intelligent Fault Diagnosis system with large storage memory of fault histories;
◆ Friendly and Intuitive User Interface. Large Color Touch LCD Screen with multi-functional buttons
2.2 Safe and Reliable
◆ DSP technology to control UPS all kinds of power function processes (including Parallel function) in order to increase system reliability;
◆ Flexible Single or Dual Utility Power Input to comprehensively protect load devices;
◆ Mis-Phase Connection Diagnosis, Evaluation and Alarm;
◆ 100% 3 Phase Unbalanced Allowed;
◆ Front Maintenance Design. MTBF can be upto 300K Hours;
◆ 90% of system components are from international famous brands. All devices has been aged and fully tested for at least 24 hours before leaving the factory.
3. Rich Optional Accessories
FC Series rear panel provides flexible monitoring ports and accessories, such as SNMP Card (Optional), and parallel communication signal port, battery data port, EPO emergency shutdown port, and standard RS232 port.
4. Application Type
FC Series is designed for many different applications and compatible Loads, such as Data Center, Telecom, Network management center, financial center Security Trading Settlement Center, Banking. Large Theater, Stadium, traffic Administration Bureau, Road and Railroad Tunnel Lightning Control and Monitoring Center, Port Information Center. Semiconductor production line, automatic production line and related devices.
5. Technology Points
◆ Full DSP provides higher system reliability and consistency than traditional UPS systems.
◆ Output Power Factor 0.9 to enhance the load carry-abilities. (Can Carry 12.5% More Loads Capacity than Traditional UPS);
◆ Full-digital current control and non-prioritized parallel technologies (up to 8 units);
◆ Advanced and Flexible Battery Configuration:
Model |
FC100L33 |
FC150L33 |
FC200L33 |
FC300L33 |
FC400L33 |
FC600L33 |
FC800L33 |
Capacity |
10KVA/8KW |
15KVA/12KW |
20KVA/16KW |
30KVA/24KW |
40KVA/32KW |
40KVA/32KW |
40KVA/32KW |
Host Machine Specification |
|||||||
UPS Structure |
Online Double Conversion |
||||||
Technology |
Low Frequency with Output Isolated Transformer |
||||||
Overall Efficiency (AC-AC) |
90% |
||||||
Noise(In 2 meters) |
< 50-60dB |
||||||
Working Temp |
-10-40℃ |
||||||
Storage Temp |
-25 to 60℃(Without Batteries ) |
||||||
Humidity |
<95%Non-Condensing |
||||||
Safety Standard |
EN50091-1/IEC62040-1-2 |
||||||
EMC Standard |
EN 50091-1/2, IEC62040-2 |
||||||
Parallel Redundancy |
Available |
||||||
Protections |
Overload, Short-Circuit, Over Temp., Utility Power Voltage High/low, BAT Voltage High/low |
||||||
ECO |
Available |
||||||
EPO |
Available |
||||||
DC Start |
Available |
||||||
Generator Compatibility |
Available |
||||||
Display |
LCD Display: Multi-Language with all kinds of messages. Input Output Status, ECO Mode Settings, INV Temp. TX Status Calendar, Time, Serial Number, Model, Structure, History Logs, Battery Test. LED Indicators: UPS States Indicator |
||||||
Mute |
Auto |
||||||
Cabinet Standard |
IP20 |
||||||
Cooling System |
Intelligent Speed Control Cooling Fan |
||||||
Elevation |
<1500M,Without Derated |
||||||
Rectifier Specification |
|||||||
Input Voltage |
380Vac+N+W( 3 phase + PE) |
||||||
Input Voltage Range |
285-475Vac |
||||||
Input Frequency Range |
45-65 Hz |
||||||
Input PF |
0.95(with input filter) |
||||||
THDI |
<5% with optional accessories |
||||||
Dual Input Availability |
Available (Optional accessories) |
||||||
Input Mis Phase Protection |
Misphase Alarm, UPS will not be started |
||||||
Input Phase lost Protection |
Phase Lost Alarm, UPS work on Bypass mode |
||||||
Soft-Start |
> 20 Seconds |
||||||
Output Specification |
|||||||
Output Voltage |
Line Voltage: 380×(1±1%)AC or Phase Voltage: 220×(1±1%)AC |
||||||
Output PF |
0.8/0.9 optional |
||||||
Output Voltage Regulation |
380Vac±1%(Static Load);380Vac±2%(50-0% Sudden Change);380Vac±3%(100-0% Sudden Change) |
||||||
Output Freq |
±8% at 50Hz: Online Mode tracking input and bypass frequency ±0.1%: when input or bypass frequency is more than ±8% or under BAT Mode |
||||||
THD |
<1%(Linear Full Load),< 3%(Non-Linear Full Load) |
||||||
3 Phase Unbalanced |
Allow 3 Phase 100% Unbalanced |
||||||
Output Volt. Unbalanced |
≤1°(Balanced Load),≤2°(50% Balanced Load) |
||||||
Input/Output Phase Swift |
≤1°(Balanced Load),≤2°(50% Balanced Load) |
||||||
Frequency Tracking Range |
45-65Hz |
||||||
Output Waveform |
Pure Sine Wave |
||||||
Overload |
>125%: More than 10 mins; > 150%: More than 60s transfer to bypass |
||||||
Crest Ratio |
3:1 |
||||||
Short-Circuit |
Circuit Auto-Protection, Bypass Switch Tripping |
||||||
Output Abnormal |
INV. Output Auto-Locked Protection |
||||||
Bypass Specification |
|||||||
Static Bypass Transfer Time |
0ms |
||||||
Static Bypass Input Range |
380Vac(-15~+15%) |
||||||
Frequency Range |
50/60Hz±1Hz, ±2Hz, ±3Hz Adjustable |
||||||
Bypass --> INV Transfer Time |
2ms |
||||||
Frequency Tracking Speed |
0.5-2hz/s |
||||||
Manual Maintenance Bypass |
Available |
||||||
Battery Specification |
|||||||
Charging Methods |
DSP Controlled Charger: Equalized/Pulse Charge, Float Charge, Intelligent Battery Management |
||||||
Type |
Sealed Lead Acid Maintenance Free |
||||||
Rated Volts/Units |
12V/384Vdc, Std. for 32 Units,adjustable from 28-32 units |
||||||
Float Charge Voltage |
438Vdc |
||||||
Charging Current |
Can be set from the front Screen |
||||||
Abnormal Protections |
BAT over-charged, Emergency charger shutdown protection or UPS shutdown protection |
||||||
Communication Specification |
|||||||
Communication Port |
RS232/SNMP/485/Dry Contact(Optional Accessory) |
||||||
Remote Software |
Multi-functional Monitoring System, Online and BAT Mode Status, BAT Fault, Remote Control |
||||||
Physical Parameters |
|||||||
Size mm(W×D×H) |
475 x 990 x 700 |
550 x 1200 x 800 |
605 x 1350 x 800 |
||||
Net Weight Kg |
210 | 223 | 230 | 280 | 330 | 450 | 550 |
User name | Member Level | Quantity | Specification | Purchase Date |
---|